Toshiba Strata DK manual Automatic Line Selection, Ringing Line Preference, Signaling

Features

Before You Begin

Automatic Line Selection

You have Automatic Line Selection, if you go off-hook and hear dial tone and the [DN], CO, or Pooled Line (PL) LED lights steady. The LCD displays the station number (201) and the seized CO Line (11).

➤To make a call when you have Automatic Line Selection

➤Lift the handset or press 63.5.

NO. 201

USING LINE 11

You do not have Automatic Line Selection, if you have to press an available [DN] or CO Line before dialing.

➤To make a call when you do not have Automatic Line Selection

➤Press the [DN] or &2 first before using the handset or 63.5.

Ringing Line Preference

You have Ringing Line Preference, if you can answer a &2 ringing your station by lifting the handset or pressing 63.5.

You do not have Ringing Line Preference, if you have to press the button associated with the ringing call (flashing LED) to answer the call.

Signaling

If you hear a long tone, followed by a caller’s voice, you have Voice First Signaling. If you hear suasive ring tones, you have Tone Signaling.

➤To answer a call if you have Voice First Signaling

➤Talk in the direction of your telephone, or answer the call as you normally would using either the handset or 63.5.

➤To answer a call if you have Tone First Signaling

➤Lift the handset or press 63.5 or press the flashing button.

Note You can change to the alternate signaling method when making a call on a call-by-call basis by pressing ￿ after dialing an internal telephone number.

14 Strata DK Electronic Telephone 5/00