LCD Operation
Messages
...or .
3. Press &2 |
...or a [DN] + CO |
Line access code. |
The lost call prior to the call
displayed after pressing 6&5/ is displayed.
You hear dial tone.
MS. DOE 7143723546
4. Press /&$'. |
The DK System auto dials the digit “1” before dialing the saved, outgoing telephone number.
Messages
The LCD on your telephone can be used to send or receive messages to/from other LCD telephone users (sample shown at right). It can also display the names/numbers of the person
calling your telephone or the name of the person you are calling. Names and memos can also be set to display with speed dial numbers and timed reminders.
You can write or edit a station message (10~19), “fill in the blanks” of system messages 62~64, enter a name/title that you want to display when other stations call your station (see “Name/Number Display” on Page 98), or enter a Speed Dial (see “Speed Dial Memos” on Page 96) or Timed Reminder memo (see “Timed Reminders” on Page 69).
System messages 65~99, if available, are written by the System Administrator and cannot be edited by the user
➤ To enter LCD characters
1. Access message/ | A cursor |
memo/name display. | display. |
|
|
86 | Strata DK Electronic Telephone 5/00 |
