Toshiba Strata DK Call Transfer with Camp-on, The CO LED is a steady red, when the called station

HOLD LINE 2

LN 2 RECALL 203

Features

Call Transfer with Camp-on

Call Transfer with Camp-on

You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group [DNs], etc. You cannot transfer (or camp-on) to a station [PDN] or [PhDN] if the station is in the DND mode, unless the station [PDN] or [PhDN] appears on other stations.

1.Press &21)￿7516.

2.Dial the [DN] where the call is be transferred.

3.Announce the call and hang up if the station is idle

...or if the station is busy or does not answer, hang up

...or to reconnect to the transferred line

before it is answered, press the flashing &2 or [DN] + ￿￿￿.

The CO or [DN] LED flashes (conference rate). You hear internal dial tone.

The CO Line rings the called station. If you hear a single tone, you can then announce the call over the called telephone’s speaker. (If you hear ringing tone, the call was made with Tone Signaling.)

The CO LED flashes (on-hold). If you transferred the call from a [DN], the [DN]’s LED turns off. The CO Line or [DN] camps onto the called station and the called station receives a warning tone. The camped-on call rings when you hang up.

The CO LED is a steady red	NO. 204
when the called station
	CAMP-ON 4
answers the transferred call.

If the call is not answered after a specified Recall time set in system programming,

Camp-on is cancelled. The transferred call returns to your station if your station or [DN] is idle, sends a two-tone burst if your telephone is busy.

The LCD shows the CO Line number and the station number (203) where it was originally transferred.

Strata DK Electronic Telephone 5/00 37