Toshiba Strata DK manual Answering a CO Line, 104, To transfer call with camp-on to a busy station

DSS Console

Features

When the called station answers the call, the [DSS] LED stays steady red, and the CO LED becomes steady red.

If the station does not answer before a period set in system programming, the call recalls your station.

➤To transfer call with camp-on to a busy station

1.Press [DSS] corresponding to the busy station.

2.Hang up.

Answering a (CO Line)

You may hear a busy tone. The original caller is placed automatically on hold. The CO or [DN] LED flashes at double the on-hold rate, and the [DSS] LED remains steady red.

The call rings the called station once with the camp-on tone. While the called station is receiving this tone, the CO LED on your telephone flashes (on-hold rate) or if you are on a [DN] button, it goes idle. The [DSS] LED remains steady red.

When the called station answers the transferred call, the CO LED becomes steady red. The [DSS] LED remains steady red.

Note If the busy station is in the DND mode, the call is not transferred, but recalls your telephone immediately.

If the call is not answered after a specified recall time set in system programming, camp-on is cancelled and the transferred call rings back.

If your DSS Console is equipped with a &2 button, you can answer CO Line calls from the console as you would from a electronic telephone. See Chapter 2 – Features, beginning on Page 61 for detailed information.

➤Press the flashing &2.

104 Strata DK Electronic Telephone 5/00