2.Dial the number.
3.Press 68%.
4.Enter the subaddress.
5.Press 67$57.
Features
Message Waiting
This informs the system that the following digits are the subaddress.
The dialed digits will not be sent until you press this button or until the timer expires.
Message Waiting
All telephones have a standard MW/FL LED for receiving/retrieving messages left by callers that called a [PDN] that was busy or did not answer. Telephones that own [PhDNs] can also have up to four additional (flexible) message waiting [PhDN/MW] buttons and LEDs. The fourth message waiting button is reserved for the Message Center.
The MW/FL LED at the called station flashes to notify you that someone called while you were busy on another call or away from your office. You can call the other party back by pressing the 0:)/ button. Voice mail devices, as well as people, can leave message waiting indications.
If you have an LCD telephone, up to four message waiting | NO. 204 | |
displays may be stored on the LCD per each [DN]. The LCD | ||
CALL | ||
can show up to three stations that have left messages for your |
| |
|
[PDN] and three for each of your [PhDNs]. The fourth message waiting button is reserved for the Message Center.
➤To answer a Message Waiting on your [PDN]
1.Press 0:)/ and lift the handset.
Your phone rings the station or voice mail device that set the indication. The LED continues to flash red.
If you reach a station that is busy or does not answer, go
Strata DK Electronic Telephone 5/00 | 49 |
