Features
Speed Dial
Speed Dial Pause
Some Speed Dial numbers may require a pause (long or regular) or hookflash be included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash | Regular Pause | Long Pause | |
The 0:)/ is programmed to |
|
| |
allow a 0.5 or 2 seconds long |
|
| |
(set in system programming) | The pause is either 1.5 or 3 | ||
CO line hookflash when | |||
seconds (set in system | be entered anywhere in the | ||
inputting Speed Dial numbers. It | |||
programming). The LCD | Speed Dial number. The LCD | ||
is displayed on the LCD as | |||
displays | displays | ||
| |||
Press 0:)/ | Press3$8. | Press 3$8/. | |
| |||
...or enter the hookflash dial |
|
| |
code (&21)7516 + ). |
|
| |
|
|
|
Note Your telephone must have a 3$8 key to allow 0:)/ to be used to store a hookflash in Speed Dial.
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to any of the optional buttons associated with these codes. This enables up to 36 digits to be stored under one Station 6SHHG'LDO button or code. Typically, long, frequently used access numbers are stored as part of this digit string. The System Speed Dial number dials out first, then the number linked to it.
Note A designated station can be used to link System Speed Dial codes. See the System Administrator User Guide.
Important! Before linking Speed Dial Numbers, make sure the System Administrator has stored the desired number in the System Speed Dial that you are planning to use.
66 | Strata DK Electronic Telephone 5/00 |
