Toshiba Strata DK manual 118

Button Labels

Flexible Buttons

Table 16	Flexible Button Labels (continued)
	Button Label	Definitions
		Release and Answer Button
	5/6￿$16	Press to disconnect or complete the transfer the current CO or [DN] call
		and automatically answer the new incoming CO or [DN] call.
		Operational for Pooled Lines, [DN], and CO line buttons.
		Release Button
	5/6	Press to disconnect or complete the transfer of the current CO or [DN]
		call and to place your station in the idle condition.
		Save Button
		After dialing an outside or internal directory number, press to “save” the
	6$9(	number. Later, you can have the system automatically redial the number
		for you when you press the button after accessing an internal or outside
		line.
		Speed Dial Button
	6'	Press to Speed Dial a telephone number or feature access codes. SD
		buttons can be used as either System Speed Dial numbers or Station
		Speed Dial numbers.
		Speed Dial Select Button
	6'6	Press to store and access Speed Dial number. If SDS is not
		programmed on your telephone, you can substitute the * key for any of
		its referenced procedures.
		Speaker Button (Fixed)
	63.5	Press to turn the speaker on and off. This button also selects a line or an
		internal [PDN] if programmed for auto preference in system
		programming. Also used to disconnect on-hook speakerphone calls.
	67$57	Start Button
		Press to make an outgoing call using an ISDN trunk.
	68%	Subaddress Button
		Press to enter a subaddress on an ISDN trunk outgoing call.
		Tone Button
	721(	Press to change the outgoing dialing of the CO line in use from dial
		pulse to tone signaling.

118 Strata DK Electronic Telephone 5/00