Toshiba Strata DK manual DTMF Tone Dialing with and #, To call/monitor a door phone, on Page

Features

DTMF Tone Dialing with ￿and #

➤To call/monitor a door phone

1.	With the handset	You hear dial tone and the LED flashes (in-use).
	off-hook, press a
	[DN].
2.	Dial the [DN] for the	A two-way talk-path exists between your telephone
	desired door location.	and the called door phone. You can audibly monitor
		the area around the door phone.
		Note Door phone [DNs] can be stored on 6'
		buttons. See “Speed Dial–Advanced Features”
		on Page 63.

DTMF Tone Dialing with ￿ and #

You may have to send ￿ and ￿ DTMF tones to some devices or services, such as a voice mail device or computer output service. DTMF tones are automatically enabled on stations with 5'/ and 6'6. If you do not have 6'6 and 5'/, you must first dial ￿, ￿ to enable these tones.

This feature disables the Speed Dial feature during the call. Speed Dial is restored when you complete the call or place it on hold.

➤To output ￿ and ￿ DTMF tones on a telephone without a SDS/RDL￿button

➤Press ￿, then ￿

You can now output ￿ and ￿, DTMF tones, and digits ￿~￿ for the duration of the outside call. This procedure must be repeated on each call when you require such output.

Strata DK Electronic Telephone 5/00 45