Features
Speed Dial
➤To store/replace a telephone number on a Station Speed Dial button
1.Press 5'/ (or ) with the handset on- hook
2.Press 6' to store the telephone number on
6' buttons are assigned in system programming.
...or 6'6 (or) and enter the Speed Dial code that you want to store the telephone number in. See Table 14 on Page 110 for codes.
3.Enter the telephone number (max. 20 digits).
To store longer dialing strings, see Table 15 on Page 110.
To insert a pause or flash signal in the number, see “Speed Dial Pause” on Page 66.
4. Press 5'/ (or )
The number is stored.
➤To clear a telephone number on a Station SD button
➤Repeat the previous procedure, skipping Step 3.
➤To program one-touch telephone number dialing
➤Repeat the previous procedure, except for Step 3. For Step 3, press [PDN] + CO Line access code before the telephone number. See “CO Line Access Codes” on Page 108.
➤To make a call using a SD button or access code
1.Access a CO Line.
If your 6' button programmed to automatically access a CO line, skip this step.
62 | Strata DK Electronic Telephone 5/00 |
