Toshiba Strata DK manual Speed Dial, To answer an incoming call using speakerphone

3.Speak in a normal voice level toward the telephone.

4.Press 63.5.

Features

Speed Dial

Note Your 0,& button must be set in system programming to ON at the start of a call. If not, you must press the 0,& button before talking.

Your call is disconnected.

➤To answer an incoming call using speakerphone

1.Press the &2 or [DN] with the flashing LED with the handset on-hook.

The CO or [DN] LED flashes (in-use) and you are connected to the call.

2.Speak at a normal voice level toward the telephone.

3.Press 63.5 to disconnect the call.

Speed Dial

Speed Dial enables you to call a telephone number with a two- or three-digit access code. There are two types of Speed Dial numbers:

♦Station—assigned by individual station users to their own station and can only be dialed from the station that assigns it.

♦System—assigned only from attendant consoles or a designated station (typically the System Administrator station), and can be used by other stations. (See System Administrator User Guide for storing instructions.)

Important! If you do not perform the following procedures within a specified time (set in system programming for either one or three minutes) when storing speed dial numbers, the operation times out and your telephone returns to idle mode.

Strata DK Electronic Telephone 5/00 61