Toshiba Strata DK manual Fixed Button Instructions

The Grand Tour

Electronic Telephone Diagram

Table 1	Fixed Button Instructions (continued)
	Button		Instructions
		If the held party hangs up, the call is released and the &2 provides a
		hold-release signal.
+2/'￿(continued)		Note If your telephone is programmed for Automatic Hold, existing calls
			are automatically placed on hold when you answer a call or make
			another call. (See “Automatic Hold” on Page 24.)
		A different call can be held on each [DN] or
				CO LINE 02
		&2 button on your phone. Each time you
					HOLD
		press 6&5/, a different [DN] or &2 is
		selected. The selected button’s LED flashes
		rapidly and your LCD displays information for
		the call holding on that button (samples shown		DN	202
		at right).			HOLD
		➤	Press to toggle the microphone ON/OFF while the telephone is in use.
			The LED indicates the status of the microphone.
		Notes
		●	The microphone and accompanying LED are always ON when
	0,&		receiving “voice first” internal [DN] calls to enable Handsfree
(Microphone)			Answerback and OFF if you receive a ring-first call. 0,& may be ON/
			OFF when placing an on-hook CO Line or internal [DN] call.
		●	Each station’s 0,& can be set in system programming to switch ON/
			OFF with one touch, to switch OFF only while pressed and held, or to
			be either ON/OFF at the start of handsfree dialing.
		●	0,& functions on Handsfree Answerback and OCA calls for privacy.
		➤	Press to toggle the speaker ON/OFF. The LED indicates the status of
	63.5		the speaker. Also selects a line or the internal [PDN] if programmed for
	(Speaker)		auto preference in system programming. Can be used to disconnect
			on-hook speakerphone calls.
	92/	➤	Slide to adjust volume levels (see “Volume Controls” on Page 11).
	5,1*	➤	Slide to adjust the ring volume levels, and the voice levels of the caller
			(Handsfree Answerback operation).

4 Strata DK Electronic Telephone 5/00