Group | Item | Setting |
|
|
|
Parallel I/F | Buffer Print, Buffer Clear, Invalid | |
| Pin 18 | +5V, Open |
| Auto Feed XT *2 | Invalid, Valid |
Serial I/F *4 | Parity | None, Odd, Even |
| Serial Data 7/8 Bits | 8 Bits, 7 Bits |
| Protocol | Ready/Busy, |
| Diagnostic Test | No, Yes |
| Busy Line |
|
| Baud Rate | 19200 bps, 9600 bps, 4800 bps, 2400 bps, |
|
| 1200 bps, 600bps, 300 bps |
| DSR Signal | Valid, Invalid |
| DTR Signal | Ready on Power Up, Ready on Select |
| Busy Time | 200 ms, 1 sec. |
|
|
|
CSF Bin 1 *3 | Line Spacing | 6 LPI, 8 LPI |
| Bottom Margin | Valid, Invalid |
| Page Width * | 13.6", 8" |
| Page Length | 11", 11 2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", |
|
| 7", 8", 8.5" |
|
|
|
CSF Bin 2 *3 | Line Spacing | 6LPI, 8LPI |
| Bottom Margin | Valid, Invalid |
| Page Length | 11", 11 2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", |
|
| 7", 8", 8.5" |
* ML 391 Turbo only
*1 Appears only when IBM Proprinter emulation is selected. *2 Appears only when Epson LQ emulation is selected.
*3 Appears only when optional Cut Sheet Feeder Accessory is installed. *4 Appears only when optional Serial Interface is installed.
*5 Applicable only when the Roll Paper Stand is installed.
ML390/391 Turbo Printer Handbook | 71 |
