Epson |
| Commands | Notes |
|
Function | (ASCII, Decimal, Hexadecimal) |
| ||
|
|
|
|
|
Set n/ | ASCII: ESC A n | Sets line spacing of n/ | ||
60 | Dec: 27 65 n | 60 | ||
Line Spacing | n=0 to 255 |
| ||
|
| Hex: 1B 41 n | n=0: no line feed. |
|
Set n/ | ASCII: ESC 3 n | Sets a line spacing of n/ | ||
180 | Dec: 27 51 n | 180 | ||
Line Spacing | n=0 to 255 |
| ||
|
| Hex: 1B 33 n | n=0: no line feed |
|
Set n/ | ASCII: ESC + n or ESC [ n | Sets line spacing of n/ | ||
360 | Dec: 27 43 n or 27 93 n | 360 | ||
Line Spacing | OKI unique command |
| ||
|
| Hex: 1B 2B n or 1B 5B n | n=0 to 255 |
|
|
|
| n=0: no line feed |
|
Line Feed | ASCII: LF | Prints buffer data and moves the print- | ||
|
| Dec: 10 | head by the current line spacing value. | |
|
| Hex: 0A | Cancels SO and ESC SO commands. | |
n/ | ASCII: ESC J n | Executes one n/ | ||
180 |
| Dec: 27 74 n | 180 |
|
|
| out changing line spacing. | ||
|
| Hex: 1B 4A n | n=0 to 255 |
|
|
|
| n=0: no line feed, but initiates printing | |
n/ | ASCII: ESC j n | Executes one n/ | ||
180 |
| Dec: 27 106 n | 180 |
|
Feed |
| feed without changing line spacing. | ||
|
| Hex: 1B 6A n | n=0 to 255 |
|
|
|
| n=0: no line feed, but initiates printing | |
n/ | ASCII: ESC ] n | OKI unique command. Executes n/ - | ||
360 |
| Dec: 27 93 n |
| 360 |
|
| inch line feed without changing line | ||
|
| Hex: 1B 5D n | spacing. |
|
|
|
| n=0 to 255 |
|
|
|
| n=0: no line feed, but initiates printing | |
Set relative vertical print | ASCII: ESC (v n1 n2 m1 m2 | Performs carriage return in the forward | ||
position |
| Dec: 27 40 118 n1 n2 m1 m2 | or reverse direction from the current po- | |
|
| Hex: 1B 28 76 n1 n2 m1 m2 | sition. |
|
|
|
| n1=2, n2=0: specifies the number of pa- | |
|
|
| rameters (inbytes) to follow Amount of | |
|
|
| carriage returns executed=±(m1 +[m2 | |
|
|
| x256]) x (basic unit in inches) The basic | |
|
|
| unit is set by set unit command ESC (U. | |
|
|
| The default of basic unit is 1/360 inch. | |
|
|
| Forward feeding exceeding approx. 46.2 | |
|
|
| inches and reverse feeding exceeding | |
|
|
| approx. 0.5 inch are invalid. Reverse | |
|
|
| feeding is invalid in raster graphics | |
|
|
| mode. |
|
|
|
|
|
|
82 | Appendix C: Priner Commands |