EXP1240 SIP Dect System Installation Guide | Uniden instruction

EXP1240 System Installation Guide

Revision 06

EXP1240 SIP DECT System:

Installation Guide

Revision 06, July 7, 2013

©Uniden America Corp., Irving, TX CONFIDENTIAL AND PROPRIETARY

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 1 of 71

Image 1

Uniden manual EXP1240 SIP Dect System Installation Guide, Revision 06, July 7

Contents

Revision 06, July 7 EXP1240 SIP Dect System Installation Guide Contents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety Instructions Purpose and Audience About This DocumentManual Conventions Terms used in this manual Abbreviations Terms Base Station Hardware Setup Base station LEDs and their meanings Connecting the base station Wall mounting the base station Base mounting dimensions Handset front view Handset and Charger Powering on the Handset Charging the battery Initial System Configuration Summary Basic system configuration Using the Base Station Interface Home/Status screen Configuring General System Settings Management screen Change Configuration and Management Settings Change the Pstn Tones and Emergency Dialing Change the Default Password Country screen Configure the Network Settings Screen Time Settings screen Configure Time Settings Checking time settings updates Configuring the SIP Server Settings Selecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handset Timing Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base Station Home/status screen primary base enabled Configuring Level 1 Base Stations Multi-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and Up Base Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell System Changing the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration Settings Setting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Firmware path examples Configuring the Firmware Update Settings Updating Base Station Firmware Firmware Update screen Updating Handsets Firmware update progress Extensions screen To verify the firmware update Available Screens Base Station Configuration Interface Global Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions options Extensions Screen Extensions parameters read only Add Extension and Edit Extension screens Parameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parameters Dhcp Options parameters Vlan Settings parameters SIP/RTP Settings parameters NAT Settings parameters Management Screen Management Settings parameters Setting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update Screen Update Handsets parameters Time Screen Time Settings parameters DST Web Security Screen Country ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell Screen Settings for this unit parameters 71 for details RPN Dect Base Station Group parameters Configuration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers