EXP1240 System Installation Guide | Revision 06 |
Figure 24: Multi-cell screen (top) after configuration
9)Keep the Auto configure DECT sync source tree set to Disabled.
10)In the Number of SIP accounts before distributed load field, enter the maximum number of handset registrations (up to 30) for each base station. This number is synchronized among all the bases in the chain, so you only have to enter it once.
11)Click Save.
12)Use the Base Station Group table to check system synchronization.
Figure 25: Base Station Group table, synchronizing (Multi-cell screen)
© 2013 Uniden America Corp. | PROPRIETARY AND CONFIDENTIAL | Page 34 of 71 |
