Uniden EXP1240 manual Using the Base Station Interface, Summary Basic system configuration

EXP1240 System Installation GuideRevision 06

Table 4: Summary: Basic system configuration

Step		Screens used	Notes
General System Settings
1.	Change the name that appears at the top
	of the configuration screens, specify a	Management	Required
	configuration server, and enable SIP and
	system logs.
2.	Change the default user name and	Web Security	Recommended
	password.
3.	Change the PSTN tones and emergency	Country	Required for countries other
	dialing format.		than the US and Canada
4.	Configure basic network settings.	Network	Required
			Required (If you are updating
5.	Specify time server address and DST	Time	Server information, you must
	settings.	Settings	reboot the base station for
			changes to take effect.)
SIP Server Settings
		Network	Required (You must reboot the
6.	Program the SIP server(s).		base station for changes to
		Servers
			take effect).
7.	Program extensions on each SIP server.	Extensions	Required
8.	Register a handset to each extension.	Extensions	Required

Using the Base Station Interface

Each base station has a built-in HTTP server that controls the configuration interface. To open the web page:

1)Open a web browser window and type the IP address of the base station in the address bar. If you don't know the base station's IP address, try one of the following:

∘Use the IP Search function on the handsets. On any handset, press Menu ( ), then enter *47* (*IP*). After several seconds, the handset displays the MAC and IP addresses of all base stations within range. Find the MAC address of the base station in the list to determine its IP address. To exit IP Search, press End ( ) twice.

© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 16 of 71