EXP1240 System Installation Guide | Revision 06 |
6)After the base station reboots, verify the time settings updates.
∘Check the Home/Status screen to be sure the time has updated correctly.
∘Check the Time screen to verify that the time server IP address is still correct.
Figure 15: Checking time settings updates
Configuring the SIP Server Settings
1)If necessary, go to the Network screen (Figure 13) and verify that the parameters under the SIP/RTP Settings are correct.
2)In the left panel of the screen, select Servers. This opens the Servers screen.
Figure 16: Servers screen
3) Click Add Server, then enter the necessary information for the first SIP server.
© 2013 Uniden America Corp. | PROPRIETARY AND CONFIDENTIAL | Page 22 of 71 |
