Uniden EXP1240 Figure 18: , screen, no handsets registered , Figure 19: , screen, one handset registered

EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 27 of 71
Figure 18: Extensions screen, no handsets registered
2) Click Register Handset(s) to put the base station into registration mode. The base station
will remain in registration mode for 5 minutes.
3) On the handset, press Menu to open the menu screen.
4) Select Connectivity and then select Register.
5) When prompted, enter the base station registration Access Code. (The Access Code is
0000.)
6) Press the OK soft key to confirm.
7) Within a minute, the base station configuration screen will update with the new
information.
Figure 19: Extensions screen, one handset registered
8) Verify that the Extension and Display Name are correct and that the State shows SIP
Registered.
9) Make a quick test call to verify the handset is correctly registered.
10) Repeat the process for each extension.