Uniden EXP1240 manual Setting Up a Multi-cell System, Sample multi-cell system information

EXP1240 System Installation GuideRevision 06

Table 5: Sample multi-cell system information

Base Station	RPN (assigned by system)	Synchronization Source
Base #0	00	RPN 00 (self)
Base #1	04	RPN 00 (Base #0)
Base #2	08	RPN 00 (Base #0)
Base #3	0C	RPN 04 (Base #1)
Base #4	10	RPN 08 (Base #2)
Base #5	14	RPN 0C (Base #3)
Base #6	18	RPN 10 (Base #4)
Base #7	1C	RPN 10 (Base #4)

Setting Up a Multi-cell System

The table below shows a top-level summary of the steps needed to set up a multi-cell system.

Table 6: Summary: Multi-cell system configuration

Step		Screens used
1.	Place the primary base station at its final location.	NA
2.	Configure the primary base station.	Multicell
3.	Reboot the primary base station and verify the settings.	Home/Status
4.	Place each Level 1 base station at its final location.	NA
5.	Configure each Level 1 base station and reboot.	Multi-cell
		Home/Status
6.	Synchronize each Level 1 base station.	Multi-cell
7.	Repeat the process with each Level 2 base station.	Multi-cell
		Home/ Status
8.	Repeat the process with any base stations at Level 3 through	Multi-cell
	Level 6.	Home/Status

© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 31 of 71