EXP1240 System Installation Guide | Revision 06 |
Contents |
|
Introduction | 7 |
Important Safety Instructions! | 7 |
Check the Box Contents | 7 |
About This Document | 8 |
Purpose and Audience | 8 |
Manual Conventions | 8 |
Terms used in this manual | 8 |
Hardware Setup | 10 |
Base Station | 10 |
Connecting the Base Station | 10 |
Wall mounting the base station | 12 |
Handset and Charger | 13 |
Charging the battery | 14 |
Powering on the Handset | 14 |
Initial System Configuration | 15 |
Using the Base Station Interface | 16 |
Configuring General System Settings | 17 |
Change Configuration and Management Settings | 18 |
Change the Default Password | 19 |
Change the PSTN Tones and Emergency Dialing | 19 |
Configure the Network Settings Screen | 20 |
Configure Time Settings | 21 |
Configuring the SIP Server Settings | 22 |
To edit an existing server | 24 |
To delete a server | 24 |
Program the SIP Extensions | 24 |
To edit an extension | 26 |
To delete extensions | 26 |
Register Handsets to Extensions | 26 |
To deregister a handset | 28 |
Multiple Base | 29 |
Introduction | 29 |
Timing Levels | 29 |
System Chain ID and RPN | 29 |
Setting Up a | 31 |
© 2013 Uniden America Corp. | PROPRIETARY AND CONFIDENTIAL | Page 2 of 71 |
