
DSUII Attendant User’s Guide
1.1.4 SETTING VOLUME LEVELS
The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, and the handset.
•To set the ringer loudness level,
you desire. The ringer sounds Impact SCS Volume Buttons once for each change as an exam-
ple of the current setting.
Note: If you set the ringer to the OFF position, your telephone sounds a short ring burst once for each call you receive at your station.
• To set the speaker and handset loudness levels,
1.PRESS INTERCOM button.
2.PRESS the VOLUME UP OR VOL- UME DOWN button once for each change in speaker volume that you desire.
3.LIFT handset.
4. PRESS the VOLUME UP OR VOL- UME DOWN button once for each change in handset volume that you desire.
Note: When a call ends, the system resets the speaker and handset volume of all future calls to the programmed (default) setting. For instructions in setting your speakerphone’s default volume, see Default Volume Control on page 72.
August, 03 | Comdial | 5 |