Do Not Disturb Condition | Vertical Communications SCS 8312S, 8024S

Other Features

GCA70-245

7.5 Do Not Disturb Condition

You can set your telephone to a do not disturb mode using the desig- nated interactive or programmable button. The associated indicator turns on as an indication of active DND and an appropriate message appears in the display of LCD speakerphones. Under the DND con- dition, an outside call forwards to another station according to the call forwarding feature. An intercom number call doesn’t ring a DND station and the system sends a fast busy signal to the caller to distin- guish the DND condition from a standard busy line. No paging announcements are received on the DND station. Even though your station is in the DND mode, you can still make outgoing calls and access other features.

• To enable DND, proceed as follows:

1.SELECT OPTIONS.

2.SELECT NEXT until the DND option appears.

3.SELECT DND.

4.SELECT ON.

5.SELECT EXIT.

6. PRESS SPEAKER to end.	Setting Do Not Disturb

• To disable the DND condition,

—REPEAT the above procedure, BUT SELECT OFF instead of ON at step 4.

•To set a Do Not Disturb condition at your telephone when a call rings at your station,

Station with DND Set

1.Hear ringing and notice incoming call information in display.

2.PRESS programmed DO NOT DISTURB button. (See Feature But- tons section on page 62 for programming instructions.)

74

Comdial

August, 03

Image 84

Vertical Communications SCS 8312S, SCS 8324S, SCS 8324F, 8024S Do Not Disturb Condition, To enable DND, proceed as follows

Contents

DSU II Digital Expandable Systems This user’s guide is for the following system Table of Contents Advanced Call Handling Other Features Index 133 About this Book IntroductionBasic Operation Advanced Operation What is an Attendant? August Comdial Iii Comdial August Setting Up Your Speakerphone Getting Started To adjust the pedestal Models 8312S, 8324S and 8324F only Positioning Your Speakerphone Setting Display Contrast To adjust the display contrastSelect Options Setting a Personal Ringing Tone To select one of the ring tones, proceed as followsSelect Ring Setting Volume Levels To set the ringer loudness levelTo set the speaker and handset loudness levels When you hear outside ringing single long bursts When you hear intercom ringing two short burstsAnswering and Making Calls To dial an outside number manually Understanding the Basic Functions Alphanumeric Display Liquid Crystal Display-LCD Getting Started GCA70-245 Your Speakerphone’s Buttons Hold Button Hold Transfer/Conference Button TRNS/CONF Volume Control Volume UP or Volume Down Your Speakerphone’s Display Lights Next to a line button Next to a fixed feature or programmable feature button Understanding the Rings Patterns Answering Calls Answering Outside Calls When you hear an intercom tone followed by a caller’s voice Answering Intercom CallsPress Intercom Monitored Stations To monitor another telephone Holding Calls Exclusive Hold Hold Recalls If a held line is recalling, choose one of the following Directed Hold To place a call on hold at another telephone directed holdPress Intercom and Dial #90 When you hear ringing Night Transferred Calls Line Answer From Any StationCaller ID Automatic Number Identification Press Hold Call Pickup Group Call PickupTo answer a call that is ringing within your group Directed Call Pickup Answering Calls for Other Stations Receiving Subdued Off-Hook Voice Announcements Sohva Handling AN Incoming SohvaTo respond to a Sohva verbally Select and Hold Mute To respond to a Sohva nonverbally through Response Messaging Select MSG Blocking a Sohva To respond to a Sohva by blocking Voice Announce Blocking To block all voice-announced callsTo unblock all voice-announced calls Select VAB Answering Calls GCA70-245 To dial an outside number using your prime line Making CallsMaking Outside Calls Making Intercom Calls To manually cause the other telephone to ring tone callingTo voice announce manually Automatic Dialing To speed dial a system speed dial number from the dial pad Redialing Redial LAST-DIALED NumberAutomatic Redial Redial Programming Storing Numbers To permanently store a number you’ve just dialedTo dial the saved number Select Save Make a Sohva announcement using the Sohva button as follows Sending Subdued Off-Hook Voice Announcements Sohva To cancel automatic ringback Camping On and QueuingBusy or Idle STATION, Automatic CALL- Back To camp on at a busy or no answer station To camp on when you hear a busy signal Busy STATION, Wait for AN Answer Call WaitingSelect Cwait Executive Override To override an in-progress call at another telephoneTo override a Do Not Disturb condition at another station Making Calls GCA70-245 To cancel line group queuing Advanced Call HandlingWaiting for a Line Queuing To queue for a line group Call Transferring Screened Call Transfers More Transfer Options Unscreened Call Transfers To transfer an unscreened call to another system telephone Conferencing Creating a Conference CallTo retrieve a line from hold Bring that party back into Conference Unsupervised Conference Calls Managing a Conference Call Call Parking Handling Park RecallsTo answer a park recall To place a park recall on hold at your station Call Forwarding Forwarding a CallTo forward your calls Select Cfwd To cancel call forwarding To activate the Cfos feature To deactivate the Cfos featureCall Forward Outside System Cfos Press Intercom *07 Advanced Call Handling GCA70-245 Nonverbal Messaging Station-to-Station Message DeliveryTo turn on message light To turn off message light Message Waiting Light and Messaging Select Next Select MSG To turn on the message waiting light at an idle telephone To receive a message at an alert LCD Message Delivery To turn message onTo turn off message and your intercom light LCD Message List Dial Message Code Assist Button Message Delivery Response Message DeliveryTo send a message for assistance Rogramming DSS NumbersSelect DSS Autodial And Speed Dial Numbers Entering a Number Feature Access Codes To store a system feature access codeExit Dsuii Attendant User’s Guide Feature Buttons To clear a feature button assignment Select Feat Response Message Button To assign a button for nonverbal responseTransfer Button To assign a transfer to voice mail button Subdued OFF-HOOK Voice Announce Sohva Button To program a Sohva buttonGroup Listening Button To program a group listening button Assist Button To program an assist button Automatic Redial Button Rogramming GCA70-245 Other Features To access a system line groupLine Groups Volume Control Setting Current Volume Level Muting Your Speakerphone To mute your stationTo speak to the distant party Default Volume Control Background Music To turn the music onTo turn the music off Select Music Select on To enable DND, proceed as follows To disable the DND conditionDo Not Disturb Condition Select DND Select on Select Exit Account Codes To enter account code on an incoming callTo enter account code on an outgoing call Paging If your system provides an external paging unit If your system provides all-call or zone paging To make a reply to a Meet-Me To enable a Tracker Pager at your station To disable a Tracker Pager at your stationTracker Paging System Dsuii Attendant User’s Guide Other Features GCA70-245 Auxiliary Jack To use a feature button Automatic Set Relocation Service Observing Switching The Dialing Mode Between Pulse And ToneTo monitor another station at any time Toll Restriction Override To use TRO at a stationTo clear the TRO code Press Speaker Dial By Name To use dial by name Programmed Button Display Button Functions Display Button QueryTo button query your telephone Select Query Data Interface Unit To select the IST device if the Data light is offOFF Imist Module Data Light Telephone Status 18 DSS/BLF Console Operation Accessing the DSS/BLF Console Button Levels Other Features GCA70-245 Attendant Features LCD Message CreationTo store the LCD messages LCD Message Creation Examples Dialing Codes for Take MessageDialing Codes for I will Call Back Press INTERCOM, and Dial *#05 Letter Code Table for LCD Messages System Telephone Naming Name the system telephones as follows Station Name Letter Codes To set the night transfer mode from the attendant’s station Night TransferTo program a Night-Transfer button Call Transfer Voice Mail System To transfer calls to the voice mail system 100 Comdial August System Speed Dial Numbers 102 Comdial August To set the music on hold feature System ClockMusic On Hold To set the system clock from the attendant’s station Station Message Detail Accounting Smda Printout To print an Smda report System Alarm Reporting To display alarm codes Direct Inward Station Dialing Disd OFF Line Digital Voice Announcing DVA DAY Answer Messages Night Answer MessagesRecall Messages Drop Message To store DVA messagesPress Intercom and Dial *#0 110 Comdial August Appendix a Feature Access Codes Feature Enable Code Disable Code Feature Access Codes GCA70-245 August Comdial 113 114 Comdial August Abbreviation Feature Function/Definition Appendix B Display Abbreviations Display Abbreviations GCA70-245 August Comdial 117 118 Comdial August Appendix C Speakerphone Characteristics Full-Duplex Speakerphone Characteristics Speakerphone User Guidelines August Comdial 121 122 Comdial August Appendix D Glossary Glossary GCA70-245 August Comdial 125 126 Comdial August August Comdial 127 128 Comdial August August Comdial 129 130 Comdial August August Comdial 131 132 Comdial August Index 134 Comdial August