![](/images/new-backgrounds/1098022/9802299x1.webp)
Memory-recall
There are three types of recall: carrier, full and RAM. Both carrier and full stores are
Carrier recall
The
Full recall
The
RAM recall
The volatile RAM store has locations numbered 200 to 299 for the full storage of instrument settings. The parameters that are recalled are the same as those for full recall.
Recalling default settings
For a list of the default settings see Table
Memory-recall
To recall the factory default settings, press the RCL 999.
RCL | Recall Store |
:MEM | Recall Store |
:CFRQ | Recall Carrier Freq Store |
:FULL | Recall Full Store |
:RAM | Recall RAM Store |
Data type : | Decimal Numeric Program Data |
Allowed suffices : | None |
Default suffix : | None |
:UP | Step up through stores. Use this command for memory sequencing |
:DN | Step down through stores. Use this command for memory sequencing |
Data type : | None |
Allowed suffices : | None |
Default suffix : | None |
Examples: | RCL:FULL 125 |
| RCL:UP |
RCL? | Prepares message containing information on last memory store that was |
| recalled in the following format: |
| :RCL:MEM <nr1> |
Examples: | :RCL:MEM 126 |