12 When the window prompts that the new printer is successfully configured, click OK.

13 The Linux Printer Configuration window re-appears. From the Info tab, you can view the information about your printer. If necessary, you can change the printer configuration. For details about changing the printer configuration, see “Using the Configuration Tool” on page 7.8.

Changing the Printer Connection Method

If you change the printer connection method from USB to parallel or vice versa while in use, you must re-configure your Linux printer by adding the printer in your system. Take the following steps:

1Make sure that you connect the printer to your computer. Turn both the computer and the printer on.

2When the Administrator Login window appears, type in “root” in the Login field and enter the system password.

Note: You must log in as a super user (root) to install a new printer to the printing system. If you are not, ask your system administrator.

3From the Startup Menu icon at the bottom of the desktop, select Linux Printer and then Configuration Tool.

You can also access the Linux Printer Configuration window by typing in linux-config from the Terminal screen.

7.6 APPENDIX

Page 117
Image 117
Xerox 3116 manual Changing the Printer Connection Method