Xerox 701P40211 manual Configuration variables, Snmpdebuglog

Gateway ConfigurationSystem Guide

Configuration variables

Of the many parameters that are available for SNMP configuration, only the ones of common interest to Xerox customers are shown in the following table:

Table 2-1.

		Value	Default
Parameter Name	Description	Range	Value
CommandLine	Turn on/off the following flags:
	–l:logging to
	SNMP_DEBUG_LOG
	–w:logging to window
Printer operator	The name of the printer operator	String	<empty>
		(0...127)
Printer administrator	The name of the printer	String	<empty>
	administrator	(0...127)
Printer administrator location	The location of the office of the	String	<empty>
	printer administrator	(0...127)
Printer administrator Phone	The telephone number for	String	<empty>
	contacting the printer	(0...127)
	administrator
Printer location	The location of the printer	String	<empty>
		(0...127)

Enter the following Command Line variables:

-l: -w:

An example of SNMP gateway configuration for the parameters shown is:

SNMP Gateway Configuration File Section

Data:Entry Name Entry

ValueCommandLine: -l -w

Printer Operator: Janet Jones

Printer Administrator: William Webster

Printer Administrator Location: Room 409

Printer Administrator Phone: 122-0001

Printer Location: Room 444

2-4 Common Controller