Printing | System Guide |
•Use a TIFF orientation tag value of 8 to eliminate the need to rotate the image.
•Use single strip image data to eliminate additional image data manipulations.
•Use a value of 1 for Fill Order to eliminate additional image data manipulations.
Supported TIFF tags
Below is a list of the TIFF tags supported by the DocuSP software.
Compression
–Default = 1
–DocuSP supports values of 1 (uncompressed), 2 (CCITT Modified Huffman RLE, 32773 (PackBits), 3 (CCITT Group 3), and 4 (CCITT Group 4).
T4 Option
–Default = 0
–This is used to determine CCITT Group 3 one or two dimensional coding.
Fill Order
–Default = 1
–DocuSP supports values of 1 and 2.
Image Width and Image Length
– Default = none; values must be supplied.
Orientation
–Default = 1
–DocuSP supports values of 1, 3, 6, and 8. Values of 2, 4, 5, and 7 are treated as if they were 1, 3, 6, and 8 respectively.
Photometric Interpretation
–Default = none; value must be supplied.
–DocuSP supports
Resolution Units
–Default = 2
–DocuSP supports values of 2 (inches) and 3 (centimeters)
Rows Per Strip
Common Controller |
