Xerox 701P40211 manual Printer and job messages, Snmp MIB Support

System Guide Gateway Configuration

Printer and job messages

SNMP can broadcast messages about the printer and the jobs on the system. Printer messages may announce that the printer is idle, printing, or out of paper. Job messages announce that jobs are pending, processing, or completed. Other job related information may include the job owner’s name, the job quantity, the job identifier, etc.

NOTE: ”Forwarding” is not a job state that is broadcast by the controller; therefore, job forwarding information will not be displayed by the SNMP job managers.

The information that is displayed at an SNMP Manager may not always reflect the exact status of a job or printer on the DocuSP Controller. Those Managers that do not support loading of Management Information Bases (MIBs) will only display the printer and job status that they support.

SNMP MIB Support

DocuSP 3.0 SNMP MIB file uses the Xerox Common

Management Interface (XCMI) version 4.0. The following lists the

MIB files included for version 4.0:

•rfc1213 - RFC1213-MIB (MIB-II)

•rfc2790 - HOST-RESOURCES-MIB (XCMI rev 000817)

•rfc2790t - HOST-RESOURCES-TYPES (XCMI rev 000815)

•rfc1759 - Printer-MIB (XCMI rev 000818)

•rfc2707 - Job-Monitoring-MIB (Printer Working Group)

•02common - XEROX-COMMON-MIB

•06gentc - XEROX-GENERAL-TC

•07gen - XEROX-GENERAL-MIB

•10hosttc - XEROX-HOST-RESOURCES-EXT-TC

•11hostx - XEROX-HOST-RESOURCES-EXT-MIB

•15prtxtc - XEROX-PRINTER-EXT-TC

•16prtx - XEROX-PRINTER-EXT-MIB

•21rsrctc - XEROX-RESOURCES-TC

•22rsrc - XEROX-RESOURCES-MIB

•40jobtc - XEROX-JOB-MONITORING-TC

•41jobmon - XEROX-JOB-MONITORING-MIB

Common Controller 2-5