System Guide | Printing |
You may set the site default for the PCL decomposer line termination. Setting these options allows both native PCL files and ASCII streams forced through the PCL decomposer to be conditioned with various combinations of carriage returns (CR), line feeds (LF), and form feeds (FF). Mainframe and UNIX environments typically requite some form of CR/LF/FF adjustment.
This utility allows you to set a custom paper size to map to the PCL escape sequence <esc>&101A (which denotes “print on custom stock size”). HP printers generally respond to this command by imaging an area of 11.7 x 17.7 inches and then printing the image, centered, on whatever stock is supplied by the operator. The setpclcontrol utility allows you to specify a single image and paper size to correspond with this escape sequence.
NOTE: This utility is now covered on the DocuSP GUI. Select the PCL tab and make selections to Line Termination.
Set lp/lprcopycount utility
The setlpcopycount utility allows the DocuSP customer to modify the behavior of how the lp/lpr gateway should handle a copy count of one. Beginning with DocuSP version 1.41.06, the default setting ignores a copy count of one placed on the job by the lp/lpr submission protocol. This allows the internal copy count set by the PDL to take precedence. The following utility allows a customer to return the DocuSP to its original behavior: either imply a copy count of one when none is specified or honor a copy count of one if specified on the command line. This copy count of one will take precedence over the copy count set by the PDL.
Syntax of the utility: setlpcopycount
0 - Specifies that LP will set a copy count of 1 if received.
1 - Specifies that LP will ignore a copy count of 1 if received.(default)
No option will display current setting
Example:
docusp_printer% su root Password:
#cd /opt/XRXnps/bin/
#./setlpcopycount
Common Controller |
