System Guide

Troubleshooting

If there are problems starting the software, check the console window for messages.

Loading XJDC/Unix

The Xerox Job Description Compiler is loaded by entering the following on the command line:

/opt/XRXnps/bin/XJDC [-option[,option...]] <filename> ..

The filename is the name of the JSL file that is to be compiled.

The JSL filename is required to terminate with the suffix .jsl or

.JSL. The filename may contain path information.

Many options may be specified and shown in the above example. The option may be specified in any order and are 3- character abbreviations. A list of the available options and their abbreviations are as follows:

REPlace / NOReplace: Replace or backup existing PDL object files

DISplay / NODisplay: Display or suppress XJDC messages

PRInt / NOPrint Generate: JSL compilation listing always or only when errors/warnings occur

TRUncate / NOTruncate: Truncate or accept JSL source lines after 72 characters

LABel / NOLabel: Generate or suppress 128-byte Xerox standard label

COMpile / SCAn: Compile with output or scan only

SINglebyte / DOUblebyte: Use singlebyte or doublebyte code and printer carriage control translation files

Vx: LPS PDL version number, x = 10, 2, 35, 3615, 37, 38, 39, 40, 50, 3A, M10

PAPersizes: Paper size to use for PDL VM10, s = USLEGAL / USLETTER / A4

DATed = d: Date format, d = US / EUROPEAN

PAGinate = p: Lines per page, n = 0, 5 to 999 (0 means no pagination)

OUTpath=p: Base directory for output files, p = <path>, default is current directory (Note that ~ is not supported.)

Common Controller

9-15

Page 95
Image 95
Xerox 701P40211 manual Loading XJDC/Unix, Opt/XRXnps/bin/XJDC -option,option... filename