Troubleshooting

System Guide

Configuring XJDC/Unix

The configuration file, CONFIG.TXT found in the directory /opt/

XRXnps/bin/, contains default parameters for the invocation of

XJDC. The text file can be edited using any simple text editor.

The first line of the configuration file must not be edited; it contains XJDC version information. Each subsequent line contains a single option; any text following the first word, and any invalid options, are ignored. Options may be repeated or contradicted on following lines; the last option specified overrides previous options. The following sample configuration file is provided:

XJDC VM10 PDL Compiler

REPLACE

NODISPLAY

PRINT

TRUNCATE

LABEL

COMPILE

SINGLEBYTE

VM10

PAPERSIZE=USLETTER

DATE=US

PAGINATE=60

OUTPATH =/opt/XRXnps/resources/lcds

XJDC Hints and Tips

If the config file needs to be changed, modify the /opt/ XRXnps/XRXXJDC/data/CONFIG.TXT file. Otherwise, the default setting in the CONFIG.TXT file will take effect.

An example for the syntax /opt/XRXnps/bin/XJDC filename would be: /opt/XRXnps/bin/XJDC /home/XDJCtest/ BASIC.JSL where the filename is represented by /home/ XJDCtest/BASIC.JSL

The output files are stored under the OUTPATH directory which is specified in either /opt/XRXnps/bin/CONFIG.TXT file or command line. For example, if OUTPATH is /opt/XRXnps/ temp/, then all the output files are put in the directory of /opt/ XRXnps/temp.

9-16

Common Controller

Page 96
Image 96
Xerox 701P40211 manual Configuring XJDC/Unix, Xjdc Hints and Tips