Xerox 701P40211 manual Rebooting and restarting, Printing the accounting log, Type sync sync halt

Troubleshooting System Guide

Printing the accounting log

Print the accounting log to gather information and recover from various accounting problems. Either the entire Accounting log or a portion of the log may be printed. This can be completed on the DocuSP GUI in the Administration section.

Rebooting and restarting

Recovery procedures throughout this guide instruct you to either reboot or restart the software.

To reboot the system and perform a file system check, perform the following:

1.Place your mouse cursor in the background outside of the DocuSP Print Services window.

2.Right-click and select [Programs].

3.Select [Terminal].

4.Put your mouse cursor in the window and type: su

5.Select <Enter>.

6.Type in your root password.

7.Select <Enter>. A # symbol displays.

NOTE: When entering text, do so in lower-case because UNIX is a case sensitive system.

8.Type: sync; sync; halt

9.Select <Enter>. The system will reboot.

10.A Program Terminated message and an Ok prompt display. Type boot -s

11.Select <Enter>. The system will reboot.

12.When you receive the following message, “Type Ctrl-d to proceed with a normal startup, (or give root password for system maintenance)” type the root password again.

13.Select <Enter>.

14.Select the <Ctrl> and <d> keys on your keyboard at the same time to complete the boot.

NOTE: This procedure performs the file check and takes about one minute. The # symbol appears again.

9-14 Common Controller