Yamaha 02R96 manual 302

Format Details 289

12.3.12 Parameter change (Backup memory)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the value of the specified parameter will be con- trolled.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00001011	0B	02R96
ADDRESS	00000100	04	Backup memory
	0aaaaaaa	ee	Element No.
	0aaaaaaa	pp	Parameter No.
	0ccccccc	cc	Channel No.
DATA	0ddddddd	dd	Data
	:	:
EOX	11110111	F7	End of exclusive

12.3.13 Parameter request (Backup memory)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the value of the specified parameter will be transmitted as a Parameter Change.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0011nnnn	3n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00001011	0B	02R96
ADDRESS	00000100	04	Backup memory
	0aaaaaaa	ee	Element No.
	0aaaaaaa	pp	Parameter No.
	0ccccccc	cc	Channel No.
EOX	11110111	F7	End of exclusive

12.3.14Parameter change (Function call Library: store/recall)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the specified memory/library will be stored/recalled.

Transmission

If [Parameter change ECHO] is ON, this message will be retransmitted without change.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010000	10	Address UU
	00ffffff	ff	Address UL (function)
	0aaaaaaa	aa Address LU (number H)
	0aaaaaaa	aa Address LL (number L)
DATA	0ddddddd	dd	channel High
	0ddddddd	dd	channel Low
EOX	11110111	F7	End of exclusive
function				number	channel*1)	tx/rx
SCENE RECALL		0x00		0-99	256	tx*2)/r
						x
EQ LIB RECALL		0x01		1-200	0-513	tx/rx
GATE LIB RECALL		0x02		1-128	0-95	tx/rx
COMP LIB RECALL		0x03		1-128	0-513	tx/rx
EFF LIB RECALL		0x04		1-128	0-7	tx/rx
CHANNEL LIB RECALL		0x06		0-128	0-513	tx/rx
INPATCH LIB RECALL		0x07		0-32	256	tx/rx
OUTPATCH LIB RECALL		0x08		0-32	256	tx/rx
Bus to Stereo LIB RECALL		0x09		0-32	256	tx/rx

function		number	channel*1)	tx/rx
Surround Monitor LIB RECALL	0x0A	0-32	256	tx/rx
AUTOMIX LIB RECALL	0x0B	1-16	256	tx/rx
SCENE STORE	0x20	1-99	256, 16383	tx/rx
EQ LIB STORE	0x21	41-200	0-513, 16383	tx/rx
GATE LIB STORE	0x22	5-128	0-56, 16383	tx/rx
COMP LIB STORE	0x23	37-128	0-513, 16383	tx/rx
EFF LIB STORE	0x24	53-128	0-7, 16383	tx/rx
CHANNEL LIB STORE	0x26	3-128	0-513, 16383	tx/rx
INPATCH LIB STORE	0x27	1-32	256, 16383	tx/rx
OUTPATCH LIB STORE	0x28	1-32	256, 16383	tx/rx
Bus to Stereo LIB STORE	0x29	1-32	256, 16383	tx/rx
Surround Monitor LIB STORE	0x2A	1-32	256, 16383	tx/rx
AUTOMIX LIB STORE	0x2B	1-32	256, 16383	tx/rx

*1) 0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 - 263:AUX5, 512:STEREO L - 513:STEREO R

Use 256 if the recall destination or store source is a single data item.

Effect is 0:Effect 1–3:Effect 4

If the store destination is 16383 (0x3FFF), this indicates that the library data has been changed by a external cause (only transmitted by the 02R96)

*2) This is also transmitted when a program that has not been assigned to the [Program change table] is recalled. (Normally this would be transmitted as a program change message.)

12.3.15 Parameter change (Function call: title)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the title of the specified memory/library will be changed

Transmission

In response to a request, a Parameter Change message will be transmitted on the [Rx CH].

If [Parameter change ECHO] is ON, this message will be retransmitted without change.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010000	10	Function call Library
	0100aaaa	4a	Address UL (function)
	0nnnnnnn	nn Address LU (number H)
	0nnnnnnn	nn Address LL (number L)
DATA	0ddddddd	dd	title 1
	:	:
	0ddddddd	dd title x(depend on the library)
EOX	11110111	F7	End of exclusive
function				number	size
SCENE LIB TITLE		0x40		0-99, 256(0:response	16
				only)
EQ LIB TITLE		0x41		1-200(1-40:response only)	16
GATE LIB TITLE		0x42		1-128(1-4:response only)	16
COMP LIB TITLE		0x43		1-128(1-36:response only)	16
EFF LIB TITLE		0x44		1-128(1-52:response only)	16
CHANNEL LIB TITLE		0x46		0-128(0-1:response only)	16
INPATCH LIB TITLE		0x47		0-32(0:response only)	16
OUTPATCH LIB TITLE		0x48		0-32(0:response only)	16
Bus to Stereo LIB TITLE		0x49		0-32(0:response only)	16
Surround Monitor LIB TITLE		0x4A		0-32(0:response only)	16
AUTOMIX LIB TITLE		0x4B		1-16	16

12.3.16 Parameter request (Function call: title)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, a Parameter Change message will be transmitted on the [Rx CH].

02R96—Bedienungsanleitung