Yamaha 02R96 manual 303

290 Anhang C: MIDI

Refer to the above table for the Functions and Numbers.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0011nnnn	3n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010000	10	Function call Library
	0100aaaa	4a	Address UL (function)
	0nnnnnnn	nn	Address LU (number H)
	0nnnnnnn	nn	Address LL (number L)
EOX	11110111	F7	End of exclusive

12.3.17Parameter change (Function call: Scene/Library

Clear)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the specified memory/library will be stored/recalled.

Transmission

If [Parameter change ECHO] is ON, this message will be retransmitted without change.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010000	10	Function call Library
	0110aaaa	6a	Address UL (function)
	0nnnnnnn	nn	Address LU (number H)
	0nnnnnnn	nn	Address LL (number L)
EOX	11110111	F7	End of exclusive
function				number
SCENE LIB CLEAR			0x60	1-99
EQ LIB CLEAR			0x61	41-200
GATE LIB CLEAR			0x62	5-128
COMP LIB CLEAR			0x63	37-128
EFF LIB CLEAR			0x64	1-128
CHANNEL LIB CLEAR			0x66	2-128
INPATCH LIB CLEAR			0x67	0-32
OUTPATCH LIB CLEAR			0x68	0-32
Bus to Stereo LIB CLEAR			0x69	0-32
Surround Monitor LIB CLEAR			0x6A	0-32
AUTOMIX LIB CLEAR			0x6B	1-16

12.3.18 Parameter change (Function call: pair, copy)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Param- eter change ECHO] is ON.

When this is received, pairing will be enabled/disabled for the specified channel. (Items other than PAIR are reserved for future use.)

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010001	11	Function call Pair
	0000aaaa	0a	Function
DATA	0ddddddd	dd	Source channel number H
	0ddddddd	dd	Source channel number L
	0ddddddd	dd	Destination channel number H
	0ddddddd	dd	Destination channel number L
EOX	11110111	F7	End of exclusive
function				Channel
PAIR ON with COPY			0x00	*1)
PAIR ON with RESET BOTH			0x01	*1)
PAIR OFF			0x02	*1)

*1)0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 - 263:AUX8, 512:STEREO L - 513:STEREO R

Effect is 0:Effect 1–3:Effect 4

In the case of PAIR, you must specify channels for which pairing is possible.

In the case of PAIR ON with COPY, you must specify Source Channel as the copy source, and Destination Channel as the copy destination.

12.3.19 Parameter change (Function call Event: Effect)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the corresponding effect’s function activates (de- pending on the effect type).

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00000110	7F	Universal
ADDRESS	00010010	12	Function call Event
	0000aaaa	0a	Function
DATA	00000000	00	-
	0ddddddd	dd	Release:0, Press:1
	00000000	00	-
	0ddddddd	dd	Destination Effect Number 0 - 7
EOX	11110111	F7	End of exclusive
function				Channel
Freeze Play button			0x00	0:Effect1-3:Effect4
Freeze Record button			0x01	0:Effect1-3:Effect4
Auto Pan 5.1 Trigger Button			0x02	0:Effect1
Auto Pan 5.1 Reset Button			0x03	0:Effect1

• This does not activate when the effect type is different.

12.3.20 Parameter change (Key remote)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the same processing that is executed when the key specified by Address is pressed (released). (Refer to the PARAMETER CHANGE PARAMETER NUMBER LIST.)

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without change.

STATUS	11110000	F0	System exclusive message
ID No.	01000011	43	Manufacture's ID number (YAMAHA)
SUB STATUS	0001nnnn	1n	n=0-15 (Device number=MIDI Channel)
GROUP ID	00111110	3E	MODEL ID (digital mixer)
MODEL ID	00001011	0B	02R96
ADDRESS	00100000	20	Address UU
	0aaaaaaa	aa	Address UL
	0aaaaaaa	aa	Address LU
	0aaaaaaa	aa	Address LL
DATA	0ddddddd	dd	0:press, 1:release
EOX	11110111	F7	End of exclusive

12.3.21 Parameter change (Remote Meter)

When transmission is enabled by receiving a Request of Remote meter, the specified meter information is transmitted every 50 msec for 10 seconds. When you want to transmit meter information continuously, a Request must be transmitted continuously within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission has been enabled by a Request, the parameter specified by Address (see PARAMETER CHANGE PARAMETER NUMBER LIST) will be transmitted on the [Rx CH] channel at 50 msec intervals for a duration of 10 seconds.

Transmission will be disabled if the power is turned off and on again, or if the PORT setting is changed.

If [Parameter Change ECHO] is ON, this message is retransmitted without

02R96—Bedienungsanleitung