Yamaha III Click Mode, [CLICK], Press the [CLICK] button to enter the Click mode, This chapter explains the Click mode called up via the [CLICK] button

Drum Reference

Reference

Click Mode [CLICK]

This chapter explains the Click mode called up via the [CLICK] button.

In the Click mode, you can set the Click (Metronome) related parameters such as Click Voice, time signature and tempo for the entire DTXTREME III. In addition, you can use the Groove Check function and Rhythm Gate function for rhythm training and practice.

Basic Procedure in the Click Mode

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit

1

2

3

Press the [CLICK] button to enter the Click mode.

Note the tab menus (corresponding to the [F1] – [F5] and [SF1] – [SF3] buttons) to find the desired function, then press the relevant button to call up the desired dis- play.

Move the cursor to each parameter, then set the value by using the data dial, [INC/ YES] and [DEC/NO] button.

4 After setting, press the [ENTER/STORE] button to store all the settings in the Click mode, other than tempo, beat (time signa- ture) and subdivide.

CAUTION

•All the settings in the Click mode will be lost if the power is turned off without storing.

•Never attempt to turn off the power while the message “Please keep power on” is shown on the display; otherwise, all the settings in the Click mode may be lost.

104 DTXTREME III Owner’s Manual