Reference

Drum Kit Mode [DRUM KIT]

BNOTE

Determines the MIDI note number of the corresponding step.

Settings

off, C#-2 – G8

 

 

NOTE

•For details about the relationship between the Drum Voices and MIDI note numbers, see page 62.

CGATETIME

Determines the gate time (length from the moment you hit the pad to the moment the corresponding note off is transmitted to the tone generator block). In effect, this determines how long the resulting sound lasts.

Range

0.0s – 9.9s

 

 

D[SF3] ALL

Regarding the CH, NOTE, GATE TIME and VELOCITY LIMIT parameters, you can change the current values of all the steps by simultaneously holding this button and using the data dial, [INC/DEC] and [DEC/NO] buttons.

E[SF4] STEP

Regarding the CH, NOTE, GATE TIME and VELOCITY LIMIT parameters, you can change the current values of the current step number by simultaneously holding this button and using the data dial, [INC/DEC] and [DEC/NO] buttons.

F> (page)

This appears when another page can be called up from the current page. Use the Cursor [M] or [N] button to call up another page.

The second page:

1

1VELOCITY LIMIT

Determines the minimum and maximum values of the velocity range within which the Drum Voice will sound. The Drum Voice will sound only when you hit the pad at velocities within the range specified here.

Range

0 – 127

 

 

■Example Stack/Alternate program

Here is an example of how you can use Stack/Alternate. In this example, hitting the pad once produces a C major chord. Hitting it a second time produces a G major chord, and a third hit produces a C major chord again.

Example program of the Stack/Alternate

Step 001

The program for hitting the pad for the first time.

Step 002

The program for hitting the pad for the second time.

Step 003

The program for hitting the pad for the third time.

To create the above program, follow the procedure below.

1 Press the [F6] OTHER button followed by the [SF3] MIDI button to call up the MIDI display, allowing you to set the tone generator settings for each of the MIDI 16 chan- nels.

2 Move the cursor to channel 11.

3 Move the cursor down to the TRANSMIT row, then set the TRANSMIT parameter of channel 11 to “All” or “PC.”

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

DTXTREME III Owner’s Manual

87