Yamaha III Setting how the Click sound is played, Using the Measure Break Function, 1Mode, CBreak, BMeasure, BMIDI Out, [F5] OTHER, 1Measure/Break

		Reference

		Click Mode [CLICK]




	Click Sound Settings	[F5] OTHER

Setting how the Click sound is played

[SF1] OUTPUT

From this display, you can set the parameters which determine under what circumstances the click and the output for the click sound.

1		2 3

1Mode

Determines how and under what circumstances the click is played. The click can be started or stopped in synchronization with song playback/recording according to the setting here, as well as by pressing the [CLICK ON/OFF] button.

Settings		manual, play, rec, play&rec

manual	The Click is started/stopped only by pressing
	the [CLICK ON/OFF] button.
play	The Click is started/stopped by starting/stop-
	ping the Song playback, as well as by pressing
	the [CLICK ON/OFF] button.
rec	The Click is started/stopped by starting/stop-
	ping the Song recording, as well as by pressing
	the [CLICK ON/OFF] button.
play&rec	The Click is started/stopped by starting/stop-
	ping the Song playback/recording, as well as by
	pressing the [CLICK ON/OFF] button.

BMIDI Out

Determines whether or not the MIDI note number corresponding to the Click Voice is transmitted via MIDI OUT. When this parameter is set to on, the following MIDI events are transmitted via MIDI OUT.

	MIDI channel	Note	Velocity

Accent note	10	B#-1	127

1/4 note	10	C0	127

Other notes	10	B-1	127


Settings	off, on

NOTE

•The MIDI note events corresponding to the Click sound will be trans- mitted via MIDI OUT only when the Click sound is produced. The MIDI note events corresponding to the Click sound for which the Vol- ume is turned down to the minimum level on the [F1] PLAY display will not be transmitted via MIDI OUT. Likewise, the MIDI note events cor- responding to the Click sound during “Break” of the Measure Break function will not be transmitted via MIDI OUT.

COutputSel (Output Select)

Determines the output jack for the click sound.

L&R+ph (OUTPUT and PHONES), Phones (PHONES), L&R (OUTPUT), ind1&2 –

Settings ind5&6 (INDIVIDUAL OUTPUT 1 and 2 – 5 and 6), ind1 – ind6 (one of the INDIVIDUAL OUTPUTs)

Using the Measure Break Function

[SF2] MEASBRK

From this display, you can set the parameters related to the Measure Break function. By using this function, the Click Voice can be played back for speciﬁed measures and muted for speciﬁed measures repeatedly.

This function can be effectively used to bring your rhythm technique and timing up to a higher level—letting you play a certain drum phrase for several measures while listening to the Click Voice, then play the next several measures with no Click sound. For example, to have four measures with the Click Voice followed by four measures without, set the Measure parameter to 4 and the Break parameter to 4.

1		2 3

1Measure/Break

Determines whether the Measure Break function is active or not. When set to on, the Click Voice is played back for measures speciﬁed at 2 and muted for measures speciﬁed at 3 repeatedly.

Settings	off, on

BMeasure

Determines the amount of measure range within which the Click sound is played (not muted).

Range	1 – 9

CBreak

Determines the amount of measure range within which the Click sound is muted.

Range	1 – 9

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

DTXTREME III Owner’s Manual	107
DTXTREME III Owner’s Manual