Yamaha III MIDI Settings, EPAN, DVOLUME, JCC NUM, CTRANSMIT, KCC VALUE, First page, Third page, Fifth page, Second page, Fourth page, GBANK MSB/LSB

Reference

Drum Kit Mode [DRUM KIT]

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

MIDI Settings

[SF3] MIDI

From this display, you can perform the MIDI settings called up when the current Drum Kit is selected. According to the settings here, MIDI messages for 16 channels will be transmitted to the internal tone generator or the external MIDI device via MIDI when the current Drum Kit is selected. This display consists of five pages.

First page

1

2

1TG SW (Tone Generator Switch)

Determines whether or not the MIDI messages will be transmitted to the internal tone generator when the current Drum Kit is selected. When set to on, selecting the current Drum Kit transmits the MIDI messages for the corresponding channel to the internal tone generator according to the settings at 3 – K.

Settings Off, On

BMIDI SW (MIDI Switch)

Determines whether or not the MIDI messages will be transmitted to the external tone generator via MIDI OUT for each MIDI channel when the current Drum Kit is selected. When set to on, selecting the current Drum Kit transmits the MIDI messages for the corresponding channel to the external tone generator via MIDI OUT according to the settings at 3 – K.

Settings Off, On

Second page

3

4

5

CTRANSMIT

Determines the type of MIDI messages transmitted to the internal tone generator or external MIDI device. When “off” is selected, no MIDI message will be transmitted even if the TG SW and MIDI SW parameters are set to on. When “all” is selected, both Program Change and Control Change messages will be transmitted. When “PC” is selected, only Program Change messages will be transmitted.

Settings Off, All, PC

DVOLUME

Determines the value of the Volume (Control Change number 7) for each MIDI channel.

Range 0 – 127

EPAN

Determines the value of the Pan (Control Change number 10) for each MIDI channel.

Range L63 (far left) – C (center) – R63 (far right)

Third page

6

7

FVCE NUM (Voice Number)

Determines the Program Change number for each MIDI chan- nel.

Settings 1 – 128

GBANK MSB/LSB

Determines the Program Change number (by Bank MSB/LSB values) for each MIDI channel.

Settings 0 – 127

NOTE

•For details about the Bank MSB, Bank LSB and Program Change messages and how they determine the Voice of the DTXTREME III, refer to the Voice List in the separate Data List booklet.

Fourth page

8

9

HREV SEND (Reverb Send)

Determines the value of the Reverb Send Level (Control Change number 91) for each MIDI channel.

Range 0 – 127

ICHO SEND (Chorus Send)

Determines the value of the Chorus Send Level (Control Change number 93) for each MIDI channel.

Range 0 – 127

Fifth page

J

K

JCC NUM

Determines the Control Change number for each MIDI chan- nel.

Settings Off, 1 – 95

KCC VALUE

Determines the value of the specified Control Change number for each MIDI channel.

Range 0 – 127

NOTE

•If you set a Control change event JK that duplicates the VOLUME 4, PAN 5, REV SEND 8, or CHO SEND 9 setting, the Control Change event JK will take priority.

96 DTXTREME III Owner’s Manual