Reference

File Mode [FILE]

Loading a Specific Voice From an “All Data” or “All Voice” File

You can also load a single, specific Voice from the file (File extension: .T3A or .T3V) to the desired User Voice num- ber.

1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display.

2 Move the cursor to TYPE, then set the File type to “Voice.”

Only available files according to the Type are listed in the Directory/File list box on the display.

3 Move the cursor to the Directory/File list box, then select the file to be loaded.

You can select any of the files listed in the Directory/File list box on the display.

4 Press the [ENTER/STORE] button so that the Voices included in the selected file are shown in the Directory/File list box.

Empty Voices (having no audio signal) are not listed in the Directory/File list box.

5 Move the cursor to the desired Voice as Load source then press the [SF1] EXEC button.

The Voice number and name for the Load destination appear on the left half of the display.

6 Select the User Voice bank and number for the Load destination.

7 Press the [SF1] EXEC button again to execute the Load operation.

Loading WAV or AIFF Audio Files to Create a User Voice

Any audio data created and edited on a computer and saved in the WAV or AIFF format can also be used as material for a User Voice on the DTXTREME III. After connect a USB storage device containing the desired WAV/AIFF audio files then follow the instructions below.

IMPORTANT

If you are loading audio WAV/AIFF files, make sure that DIMM modules must be installed to the instru- ment. For details on installing DIMMs, see pages 76 and 147.

1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display.

2 Move the cursor to TYPE, then set the File type to “Wave.”

Only available files according to the Type are listed in the Directory/File list box on the display.

3 Move the cursor to the Directory/File list box, then select the file to be loaded.

You can select any of the files listed in the Directory/File list box on the display.

4 After selecting the file, press the [SF1] EXEC button.

The User Voice bank, number and name as Load destination appear on the left half of the display.

5 Select the User Voice bank and number as Load destination.6 Press the [SF1] EXEC button again to execute the Load operation.

NOTE

•The WAV/AIFF file can be loaded is only 16bit (sample size).

•An error message appears when you try to load an unavailable file.

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

DTXTREME III Owner’s Manual

119