Yamaha III MIDI Sync Settings, MIDI Other Settings, CMerge, CSeqCtrl, BClockOut, BThruPort, DDeviceNo, 1MIDI Sync, 1MIDI IN/OUT, [F6] FACTSET, Utility Mode [UTILITY]

Reference

Utility Mode [UTILITY]

MIDI Sync Settings

[SF2] SYNC

Song or Click playback of the DTXTREME III can be synchronized with the external MIDI clock coming from the MIDI device connected to the DTXTREME III. (Song or Click conventionally plays according to the internal clock.) From this display, the related parameters can be set.

1 2 3

1MIDI Sync

Determines whether Song playback will be synchronized to the instrument’s internal clock or an external MIDI clock.

Settings		internal, MIDI
Internal	Synchronization to internal clock. Use this set-
	ting when this instrument is to be used alone or
	as the master clock source for other equipment.
MIDI	MIDI Synchronization to a MIDI clock received
	from an external MIDI instrument via MIDI.

NOTE

•When the MIDI Sync parameter is set to MIDI, make sure that the external MIDI equipment or computer connected to the DTXTREME III can transmit MIDI clock data.

BClockOut

Determines whether MIDI clock (F8H) messages will be transmitted from the DTXTREME III via MIDI.

Settings off, on

CSeqCtrl

Determines whether Sequencer Control signals – start (FAH), continue (FBH), and stop (FCH) – will be received and/or transmitted via the MIDI OUT/USB terminal.

Settings		off, in, out, in/out
off	Not transmitted/recognized.
In	Recognized but not transmitted.
out	Transmitted but not recognized.
in/out	Transmitted/recognized.

MIDI Other Settings

[SF3] OTHER

1 2 4 3

1MIDI IN/OUT

Determines which physical output/input terminal(s) will be used for transmitting/receiving MIDI data.

Settings MIDI, USB

BThruPort

When using the USB terminal for MIDI transmission/recep- tion, you can have the DTXTREME III respond to MIDI data over one port, while relaying the data for another port number (which can be set here) to a separate tone generator (con- nected to the MIDI OUT terminal).

Settings 1, 2

CMerge

This parameter allows you to mix incoming MIDI data (received via MIDI IN) with MIDI data generated on the DTXTREME III, and output them together from MIDI OUT. Merge is enabled when this is set to on. This parameter is useful when you want to control a MIDI tone generator connected to the DTXTREME III by playing a different MIDI keyboard connected to the DTXTREME III and playing the drum pads at the same time.

Settings off, on

DDeviceNo.

Determines the device number used by the DTXTREME III in receiving or transmitting data. This number must match the Device Number of the external MIDI device when transmit- ting/receiving bulk data, parameter changes or other system exclusive messages.

Settings		1 – 16, all, off
all	When this is selected, system exclusive mes-
	sages for all MIDI device numbers are received.
	The DTXTREME III is recognized as Device
	Number 1.
off	When this is selected, system exclusive mes-
	sages such as bulk dump and parameter
	change cannot be transmitted or received.
	When you try to execute transmission or recep-
	tion of system exclusive messages, an error
	message appears.

mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

Resetting the User Memory to the Initial Factory Settings [F6] FACTSET

The original factory settings of the DTXTREME III’s User Memory (page 76) can be restored. For details and instructions, see page 27.

Sampling

DTXTREME III Owner’s Manual 131