Yamaha III Type, Type, 1Type, 1Type, B Length, User Voice, BVariation, 07: Loop-Remix, 04: Fade In/Out, 05: Convert Freq, 1 Type (Fade Type), 06: Stereo to Mono

	Reference
	Sampling Mode [SAMPLING]
ク
イ	04: Fade In/Out
ッ
ク
ガ	This Job lets you create a fade-in for the starting portion of
イ	the User Voice and a fade-out for the ending section of the
ド
	User Voice.
Reference		1 2
Kit Drum	1 Type (Fade Type)
mode
	Determines the type of level fade: fade-in or fade-out.
	Settings	in (fade-in), out (fade-out)
Song	B Length
	Determines the length of the fade-in or fade-out. When a fade-
mode
	in is selected, this parameter specifies the length of the fade
	starting at the specified Start point. When a fade-out is
	selected, this parameter specifies the length of the fade start-
	ing at the beginning of the fade and ending at the specified
Click	End point. A Length setting of 4410 is roughly equivalent to
	0.1 seconds when the Frequency is set to 44.1 kHz in the Set-
mode	ting display (page 136) of the Sampling mode.
	Range	00000000 – End point
mode Trigger		Fade In
	Length
File	Start point
mode		Fade Out
mode Utility		Length
		End point

Chain	05: Convert Freq
	This Job lets you halve the sampling frequency of the spec-
mode	ified User Voice. This can be used to convert hi-fi Voices to
	a lo-fi sound, as well as reduce the User Voice size by half.
mode Sampling

06: Stereo to Mono

This Job lets you convert a stereo User Voice to a mono User Voice.

1

1Type

Determines which channel, or both channels, of the stereo User Voice will be converted to a mono User Voice.

Settings L+R>mono, L>mono, R>mono

L+R>mono The left and right channels of a stereo Sam-

	ple are mixed and converted to a mono Sam-
	ple.
L>mono	The left channel of a stereo Sample is con-
	verted to a mono Sample.
R>mono	The right channel of the stereo sample is con-
	verted to a mono sample.

07: Loop-Remix

This Job lets you automatically cut the audio data included in the User Voice into separate “slices” and randomly rearrange the slices for special effects and unusual rhythmic variations.

1 2

1Type

Determines the degree to which the looped portion of the User Voice will be sliced.

Settings 1 – 4

BVariation

Determines how the original User Voice is varied by this Job.

Settings normal1 – 2, reverse1 – 2

normal1 – 2 These settings slice and rearrange the User Voice data, without performing any other audio changes.

reverse1 – 2 In addition to slicing and rearranging, these settings reverse the playback of some of the slices.

144 DTXTREME III Owner’s Manual