Reference

Drum Kit Mode [DRUM KIT]

The second page when the INPUT display is called up:

6 5

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The second page when the SOURCE display is called up:

6 5

 

7

 

 

 

 

 

 

 

 

 

 

 

 

EVelSensDpt (Velocity Sensitivity Depth)

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the degree to which the resulting volume of each selected Trigger Input Jack responds to the strength with which you hit the pad. When the SOURCE display is called up, this parameter determines the degree to which the resulting volume of each selected Trigger Input Source responds to the strength with which you hit the pad.

The higher the value, the more the volume changes in response to your hitting strength (as shown below).

Range

0 – 127

 

 

When the VelSensOfs parameter below is set to 64:

Depth=127

127

Depth=64

Actual resulting velocity

(affecting the toneDepth=32 generator block)

Depth=0

0127

Velocity at which pad is hit

FVelSensOfs (Velocity Sensitivity Offset)

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines how the played velocities of each selected Trigger Input Jack affect the actual resulting velocity. When the SOURCE display is called up, this parameter determines how the played velocities of each selected Trigger Input Source affect the actual result- ing velocity.

This lets you raise or lower all velocities by the same amount—allowing you to automatically compensate for play- ing too strongly or too softly. If the result is 0 or less, the value is set to 0. If the result is higher than 127, the value is set to 127.

Range

0 – 127

 

 

When Depth (above) = 64 and Offset = 32

127

Actual resulting velocity (affecting the tone generator)

0 64 127

Velocity at which pad is hit

When Depth (above) = 64 and Offset = 96

127

Actual resulting velocity (affecting the tone generator)

0 64 127

Velocity at which pad is hit

When Depth (above) = 64 and Offset = 64

127

Actual resulting velocity (affecting the tone generator)

0 64 127

Velocity at which pad is hit

GSliderSel (Slider Select)

When the INPUT display is called up, this parameter determines the Slider with which you can adjust the volume of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the Slider with which you can adjust the volume of each selected Trigger Input Source.

Settings kick, snare, tom, cymbal, hihat, misc

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

DTXTREME III Owner’s Manual

85