Yamaha III 1Name, B[SF6] LIST, 3 Enter the Song name by following the instructions on page

Quick Guide

Recording Your Drum Performance to a Song

Assigning a Name to a User Song

You can assign an original name to a User Song.

1 With the desired User Song selected, press the [F2] JOB button followed by the [SF1] SONG button in the Song mode to call up the SONG JOB SELECT display.

2 Move the cursor to “03: Song Name, Tempo, Repeat” then press the [ENTER/STORE] button to call up the Job display.

1

2

1Name

Determines the Song name, which can contain up to 10 characters. For detailed instructions on naming, refer to “Basic Operation” on page 15.

B[SF6] LIST

When the cursor is located at Name, this [LIST] icon appears at the right bottom of the display indicating that you can call up the Character List display by holding the [SF6] button. For details, see page 15.

3 Enter the Song name by following the instructions on page 15.

You can call up the character list by pressing the [SF6] LIST button, then select the desired one from the list.

Quick Guide

DTXTREME III Owner’s Manual 49