Yamaha III manual 73

			Reference
			Basic Structure of the DTXTREME III
Paramater	Descriptions	Paramater	Descriptions
name		name
DelayC	Determines the delay time for the center channel.	DyLvlOfs	Determines the offset value added to the output from
			the envelope follower.
DelayL	Determines the delay time for the L channel.
			Determines the minimum level at which the envelope.
	Determines the amount of time between the moment	DyThreshLvl
			follower starts.
DelayL>R	the sound is input from the L channel and the
	moment the sound is output to the R channel.	Edge	Sets the curve that determines how the sound is dis-	Reference
			torted.
DelayOfstR	Determines the delay time for the R channel as off-
	set.	Emphasi	Determines the change of the characteristics in high
			frequencies.
DelayR	Determines the delay time for the R channel.
			Determines the Cutoff frequency of EQ1 (Low Shelv-
	Determines the amount of time between the moment	EQ1Freq
			ing).
DelayR>L	the sound is input from the R channel and the
	moment the sound is output to the L channel.	EQ1Gain	Determines the level gain of EQ 1 (Low Shelving).	mode
	[For REVERB effects, except EARLY REFLECTION]	EQ2Freq	Determines the center frequency of EQ2.
	Determines the density of the reverberations.
Density		EQ2Gain	Determines the level gain of EQ2.	Kit
	[For EARLY REFLECTION]
		EQ2Q	Determines the Q of EQ2.	Drum
	Determines the density of the reflections.
		EQ3Freq	Determines the center frequency of EQ3.
	[For FLANGER]
	Determines the amplitude of the LFO wave which	EQ3Gain	Determines the level gain of EQ3.
	controls the cyclic change of the delay modulation.
		EQ3Q	Determines the Q of EQ3.	mode
Depth	[For PHASER MONO, PHASER STEREO]
	Determines the amplitude of the LFO wave which	EQ4Freq	Determines the center frequency of EQ4.
	controls the cyclic change of the phase modulation.
		EQ4Gain	Determines the level gain of EQ4.	Song
	[For SPACE SIMULATOR]
		EQ4Q	Determines the Q of EQ4.
	Determines the depth of the simulated room.
			Determines the Cutoff frequency of EQ5 (High
Detune	Determines the amount of detuning of the pitch.	EQ5Freq
			Shelving).
Device	Selects the device for changing how the sound is to
		EQ5Gain	Determines the level gain of EQ5 (High Shelving).
	be distorted.			mode
			Determines the center frequency for each band of
	[For TEMPO PHASER, EARLY REFLECTION]	EQFreq
			the EQ.
Diffuse	Determines the spread of the selected effect.			Click
	[For REVERB effects, except EARLY REFLECTION]	EQGain	Determines the level gain of the EQ center frequency
	Determines the spread of the reverb.		for each band.
Directn	Determines the direction of the modulation controlled	EQWidth	Determines the width of the EQ band.
	by the envelope follower.
		ER/Rev	Determines the level balance of the early reflection	mode
Div.Lvl	Determines the minimum level of the portions		and reverb sound.
	extracted via the slice effect.
			This Auto Pan parameter (available when PAN Direc-
				Trigger
DivFreqH	Determines the high frequency for dividing the entire	F/RDpth	tion is set to “L turn” and “R turn”) determines the
	sound into three bands.		depth of the F/R (front/rear) pan.
DivFreqL	Determines the low frequency for dividing the entire	FBHiDmp	Determines how the high frequencies of the feedback
	sound into three bands.		sound decay.
	Determines how the sound (wave) is sliced by the	FBHiDmR	Determines the amount of decay in high frequencies	mode
DivideType	note length. This helps in setting rhythmic effects that		for the R channel as offset.
	match the timing of the music.
			[For CHORUS effects, DELAY effects, TECH effects,	File
DlyLvl	Determines the level of the delayed sound.
			CLASSIC FLANGER, TEMPO FLANGER, DYNAMIC
			FLANGER, COMP DISTORTION DELAY]
DlyLvlC	Determines the level of the delayed sound for the
			Determines the feedback level output from the delay
	center channel.
			and returned to the input.
		FBLevel
DlyMix	Determines the mixing level of the delayed sound.
			[For TEMPO PHASERÅADYNAMIC PHASER]	mode
DlyOfst	Determines the offset value of the delay modulation.		Determines the feedback level output from the delay
			and returned to the input.
	Determines the speed (rate) at which the delay time
			[For REVERB effects]	Utility
DlyTrnsit	is changed from the current value to the specified
			Determines the feedback level of the initial delay.
	new value.
			Determines the feedback level of the delayed sound
	[For HARMONIC ENHANCER, TALKING MODULA-	FBLvl1
			in the 1st series.
	TOR]
	Determines the extent to which the enhancer or talk-	FBLvl2	Determines the feedback level of the delayed sound	mode
Drive	ing modulator is applied.		in the 2nd series.
	[For NOISY, SLICE]
		FBLvlR	Determines the feedback level for the R channel as
	Determines the degree and character of the distor-		offset.	Chain
	tion effect.
		FBTime	Determines the delay time of the feedback.
DriveHorn	Determines the depth of the modulation generated
		FBTime1	Determines the delay time of feedback 1.
	via the rotation of the horn.
		FBTime2	Determines the delay time of feedback 2.	mode
DriveRotor	Determines the depth of the modulation generated
	via the rotation of the rotor.	FBTimeL	Determines the delay time of the feedback for the left
	Determines the balance of the dry sound and effect		channel .
Dry/Wet				Sampling
	applied to the dry sound.		Determines the level of the sound signal output from
	sound.	FBTimeR	Determines the delay time of the feedback for the
DryLPF	Determines the cutoff frequency of the low pass filter		right channel .
		Feedback	the effect block and returned to its own input.
DryLvl	Determines the level of the dry sound (the unproc-
	essed sound).	Fine1	Determines the fine pitch setting for the 1st series.
DryMixLvl	Determines the level of the dry sound (the unproc-	Fine2	Determines the fine pitch setting for the 2nd series.
	essed sound).
			[For LO-FI]
	Determines the level of the dry signal sent to the
DrySndNoise		FltType	Determines the type of tonal characteristics.
	noise effect.		[For DYNAMIC FILTER]
			Determines the filter type.

DTXTREME III Owner’s Manual 73