Reference

Drum Kit Mode [DRUM KIT]

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

CVoice number

Determines the Voice number included in the Voice category selected at 2.

Settings Refer to the separate Data List booklet.

NOTE

•Check the Stack/Alternate settings; when “----” is displayed, you can- not select the voice category and number (page 86 and 126).

D[SF5] INPUT

Pressing the [SF5] button toggles the display type between “INPUT” (meaning that parameters can be edited for each Trigger Input jack) and “SOURCE” (meaning that parameters can be edited for each Trigger Input Source).

E[SF6] Input Lock

You can turn Input Lock on or off by pressing this button. When Input Lock is turned on (the [L] indicator appears at the top right of the display), the Trigger Input Source 1cannot be changed even if you hit any pad. This function is useful when you want to adjust the parameters of the current Trigger Input Source while hitting the pads of other Trigger Input Sources.

When “MIDI” is selected as SOURCE, the following display appears.

1

1Note number

Determines the MIDI note number to which you can assign the desired Drum Voice.

Settings

C#1 – A#5

 

 

NOTE

•MIDI note messages from an external MIDI device can also be used to set this parameter. Once this is set via MIDI, Input Lock can be used to disable further inadvertent editing.

Setting Volume, Tuning and Other Parameters

[SF2] OUT-TUNE

From this display, you can set parameters such as volume and tuning. This display consists of two pages, which can be called up via the Cursor [N] and [M] buttons.

The first page when the INPUT display is called up:

3

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The first page when the SOURCE display is called up:

3

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The initial page when the SOURCE display is called up and “MIDI” is selected:

3

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Volume

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the volume of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the volume of each selected Trigger Input Source. You can adjust the volume balance among the Voices assigned to the pads by setting this parameter.

Range

0 – 127

 

 

BTuning

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the pitch of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the pitch of each selected Trigger Input Source. The Tuning parameter can be adjusted finely in cents.

Range

-24.00 – +24.00

 

 

CPAGE >

This appears when another page can be called up from the current page. Use the Cursor [M] or [N] button to call up another page.

80

DTXTREME III Owner’s Manual