Yamaha III Master EQ Settings, CGAIN, 1SHAPE, [F3] EFFECT, [SF5] BYPASS, E[SF5] BYPASS, BFREQ (Frequency), DQ (frequency bandwidth)

	Reference
	Utility Mode [UTILITY]
Effect Settings	[F3] EFFECT

Among the entire Effect system (page 68) of the DTXTREME III, the parameters related to the Master EQ and Master Effect can be set in the Utility mode.

NOTE

• For details about the Effect structure of the DTXTREME III, see page 68.

Reference

Master EQ Settings

[SF1] MEQ

From this display you can apply five-band equalization to the entire sound of the DTXTREME III.

1

2

3

4

5

Gain Q (frequency bandwidth)

+

0

Frequency

–

5 bands Low Lo-Mid Mid Hi-Mid High

1SHAPE

Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type atten- uates/boosts the signal at frequencies above or below the specified Frequency setting. This parameter is available only for the LOW and HIGH frequency bands.

Settings shelv (Shelving type), peak (Peaking type)

●shelv (Shelving type)

This type of EQ shape lets you attenuate/boost the signal at frequencies above or below the specified Frequency setting.

EQ Low		EQ High
+	Gain	+	Gain
	Frequency		Frequency
0		0
–		–
	Frequency			Frequency

●peak (Peaking type)

This type of EQ shape lets you attenuate/boost the signal at the specified Frequency setting.

+Gain

Frequency

0

Frequency

–

BFREQ (Frequency)

Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.

Range		See below.
LOW	When the Shape is set to “shelv”:
	32Hz – 2.0kHz
	When the Shape is set to “peak”:
	63Hz – 2.0kHz
LOWMID, MID, HIGHMID
	100Hz – 10kHz
HIGH	500Hz – 16kHz

CGAIN

Determines the level gain for the Frequency (set above), or the amount the selected frequency band is attenuated or boosted.

Range -12 dB – +0 dB – +12 dB

DQ (frequency bandwidth)

This varies the signal level at the Frequency setting to create various frequency curve characteristics. The higher the set- ting, the smaller the Q (Bandwidth). The lower the setting, the greater the Q (Bandwidth).

Range	0.1 – 12.0
+	0.1
	12.0

0

Frequency

–

Frequency

E[SF5] BYPASS

Pressing this button toggles the bypass status of the Master EQ between on and off. When Bypass is turned off (BYPASS is shown with white text in black), the Master EQ will be applied to the entire sound of the DTXTREME III. When Bypass is turned on (BYPASS is shown with black text in white), the Master EQ will be bypassed for the entire sound of the DTXTREME III.

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode

DTXTREME III Owner’s Manual 127