Yamaha III 3 Select a track to be cleared, 4 Press the [ENTER/STORE] button, 6 Re-recordyour drum performance to the cleared track

Guide Quick

Quick Guide

Recording Your Drum Performance to a Song

Re-recording a Track After Clearing

To record again, use the following procedure to clear previously recorded data in the track, then try recording again.

1 With the User Song to be re-recorded selected, press the [F2] JOB button followed by the [SF2] TRACK button in the Song mode to call up the TRACK JOB SELECT display.

2 Move the cursor to “04: Clear Track,” then press the [ENTER/ STORE] button to call up the Clear Track Job display.

1

1Track

Indicates the track to be cleared.

3 Select a track to be cleared.

If you have copied the Preset Song data to the User Song and then recorded your drum performance to track 2, select “2” here.

4 Press the [ENTER/STORE] button.

The display prompts you for confirmation. To cancel the Clear Track operation, press the [DEC/NO] button.

5 Press the [INC/YES] button to execute the Clear Track operation.

The data recorded to the specified track will be erased.

6 Re-record your drum performance to the cleared track.

Follow the instructions on page 44.

48 DTXTREME III Owner’s Manual