ク

Reference

Sampling Mode [SAMPLING]

イ

ッ

ク

ガ

イ

ド

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

10: Copy

This Job lets you copy the data of one User Voice to another.

1

2

1User Voice bank and number as SourceBUser Voice bank and number as Destination

Determines the User Voice banks and numbers as source and destination.

CAUTION

•This operation overwrites any data previously existing at the desti- nation User Voice number.

11:DeleteThis Job lets you delete a specific User Voice from mem- ory.

1

1User Voice bank and number

Determines the User Voice bank and number to be deleted.

12: Delete All

This Job lets you delete all User Voices. After calling up this display, press the [ENTER/STORE] button to delete all User Voices.

13: Extract

This Job lets you delete from memory all unnecessary audio data included in the User Voice (located ahead of the Start Point and located after the End Point), leaving only the portion of the sample you wish to keep.

1

1User Voice bank and number

Determines the User Voice bank and number of which the unnecessary portion is to be extracted.

14: Optimize Memory

This Job optimizes the memory (DIMM) for Sampling. Optimization consolidates areas of used and unused (avail- able) memory to create the largest possible area of contiguous available memory. In some cases, the amount of remaining memory will be increased when you execute the Optimize Memory Job.

After calling up this display, press the [ENTER/STORE] button to execute the Optimize Memory Job.

146

DTXTREME III Owner’s Manual