Yamaha III Loading a Specific Trigger Setup From an “All Data” or “All Trigger” File, Loading a Specific Chain From an “All Data” or “All Chain” File

Reference

File Mode [FILE]

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

Loading a Specific Trigger Setup From an “All Data” or “All Trigger” File

You can also load a single, specific Trigger Setup from the file (File extension: .T3A or .T3T) to the desired Trigger Setup number.

1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display.

2 Move the cursor to TYPE, then set the File type to “Trigger.”

Only available files according to the Type are listed in the Directory/File list box on the display.

3 Move the cursor to the Directory/File list box, then select the file to be loaded.

You can select any of the files listed in the Directory/File list box on the display.

4 Press the [ENTER/STORE] button so that the Trigger Setups included in the selected file are shown in the Directory/File list box.

5 Move the cursor to the desired Trigger Setup as Load source then press the [SF1] EXEC button.

The Trigger Setup number and name for the Load destination appear on the left half of the display.

6 Select the Trigger Setup number for the Load destination.

7 Press the [SF1] EXEC button again to execute the Load operation.

Loading a Specific Chain From an “All Data” or “All Chain” File

You can also load a single, specific Chain from the file (File extension: .T3A or .T3H) to the desired Chain number.

1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display.

2 Move the cursor to TYPE, then set the File type to “Chain.”

Only available files according to the Type are listed in the Directory/File list box on the display.

3 Move the cursor to the Directory/File list box, then select the file to be loaded.

You can select any of the files listed in the Directory/File list box on the display.

4 Press the [ENTER/STORE] button so that the Chains included in the selected file are shown in the Directory/File list box.

5 Move the cursor to the desired Chain as Load source then press the [SF1] EXEC button.

The Chain number and name for the Load destination appear on the left half of the display.

6 Select the Chain number for the Load des- tination.

7 Press the [SF1] EXEC button again to execute the Load operation.

118 DTXTREME III Owner’s Manual