Yamaha III Settings Common to the Entire Drum Kit, Hi-HatController Settings, Volume, BTempo, 1Volume, BMIDI Ch, 1Function, [F6] OTHER, CMIDI Type, CRevSend (Reverb Send)

	Reference
	Drum Kit Mode [DRUM KIT]
Other Settings	[F6] OTHER

Settings Common to the Entire Drum Kit

[SF1] COMMON

From this display, you can set the parameters applied to the entire sound of the current Drum Kit.

2 1 4 3

1Volume

Determines the volume of the entire Drum Kit.

Range 0 – 127

BTempo

Determines the tempo value called up when you select the current Drum Kit. When “off” is selected, the tempo value is maintained when you select the current Drum Kit.

Range off, 30 – 300

CRevSend (Reverb Send)

Determines the Reverb depth applied to the Drum Kit. This parameter offsets the same parameter for each of the Drum Voices assigned to the current Drum Kit.

Range 0 – 127

Hi-Hat Controller Settings

[SF2] HH CTRL

From this display, you can set the parameters related to the Hi-Hat Controller (Foot Controller) connected to the HI- HAT jack (page 12).

1Function

Determines the function assigned to the Hi-Hat Controller. When “Hi-Hat” is selected, you can use the Hi-Hat Controller normally for playing the hi-hat cymbal. When “MIDI” is selected, you can generate MIDI messages by pressing the Hi- Hat Controller according to the settings of the MIDI Ch parameter and MIDI Type parameter described below.

Settings HiHat, MIDI

BMIDI Ch

Determines the MIDI channel over which operating the Hi- Hat Controller generates MIDI messages. This parameter is available only when the Function parameter is set to MIDI.

Settings 1 – 16

CMIDI Type

Trigger mode Click mode Song mode Drum Kit mode Reference

D ChoSend (Chorus Send)		Determines the type of MIDI messages generated by operat-
Determines the Chorus depth applied to the Drum Kit. This		ing the Hi-Hat Controller. This parameter is available only
		when the Function parameter is set to MIDI. “Ctl000” –
parameter offsets the same parameter for each of the Drum
		“Ctl119” represent Control Change messages, “AT” repre-
Voices assigned to the current Drum Kit.
		sents Aftertouch, “PB up” represents Pitch Bend upward
Range	0 – 127	(when pressing) and “PB down” represents Pitch Bend down-
		ward (when pressing).
		Settings	Ctl000 – Ctl119, AT, PB up, PB down

Sampling mode Chain mode Utility mode File mode

DTXTREME III Owner’s Manual 95