Yamaha III TYPE, 1TYPE, F[F6] NEW, [F3] RENAME, D[SF1] EXEC, E[SF2] SET NAME, 5 Enter the new name, CFile name input location, B File /Directory (Folder)

		Reference

		File Mode [FILE]




	Changing the Name of a File or Directory	[F3] RENAME

This lets you rename the selected ﬁle/directory selected on the current drive.

You can rename ﬁles using up to eight alphabetic and numeric characters. Files having the same name cannot be saved in the same directory.

Files are named according to MS-DOS naming conventions. If the ﬁle name contains spaces and other characters unrecognized in MS-DOS, these characters will automatically be replaced by “_” (underscore) characters when saving.

Reference

1 Press the [FILE] button to enter the File mode then press the [F3] RENAME button to call up the Rename display.

1TYPE

Determines the desired File type. For details about the File type, see page 113.

B File /Directory (Folder)

selection box

Indicates the directories and ﬁles in the current Directory. In this box, the directories and ﬁles are listed in alphabetical order. Pressing the [ENTER/STORE] button enters the selected directory (folder) while pressing the [EXIT] button returns to the next highest directory.

You can distinguish the directory and ﬁle by the indicator at left end of each line.

...........Directory (Folder)

............File

CFile name input location

You can enter a name of up to eight characters for the ﬁle you are about to save. For detailed instructions on naming, refer to “Basic Operation” on page 15.

D[SF1] EXEC

Pressing this button executes the rename of selected ﬁle.

E[SF2] SET NAME

Pressing this button copies the ﬁle/directory name selected at the ﬁle/directory selection box to the ﬁle name input location.

F[F6] NEW

Pressing this button creates a new directory in the current directory.

2 Move the cursor to TYPE, then set the desired ﬁle type by using the data dial, or the [INC/YES] and [DEC/NO] buttons.

3 Move the cursor to the ﬁle/directory selection box, then select the desired ﬁle or directory to be renamed by using the data dial, or the [INC/YES] and [DEC/NO] but- tons.

4 Press the [SF2] SET NAME button.

The name of the selected ﬁle is copied to the ﬁle name input location.

5 Enter the new name.

Follow the instructions for “Inputting Characters (Naming, etc.)” on page 15. You can call up the Character List by pressing the [SF6] button.

6 Press the [SF1] EXEC button to execute the Rename operation.

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode

DTXTREME III Owner’s Manual	121
DTXTREME III Owner’s Manual